Aangesien besighede op soek is na meer doeltreffende maniere om droë massamateriaal te berg, te hanteer en te vervoer, is die keuse van die regte verpakkingsoplossing noodsaaklik. Hebei Wanhefeng Package Co., Ltd. verskaf pasgemaakte FIBC grootmaat sakke vir poeiers, korrels en ander industriële materiale.

FIBC grootmaatsakke, ook bekend as buigsame tussengrootmaathouers of jumbosakke, is 'n praktiese keuse vir baie verpakkingstoepassings. Hul buigsame konstruksie, hoë laaivermoë en verenigbaarheid met meganiese hantering kan help om laai, aflaai, berging en vervoer te vereenvoudig.

Pasgemaakte grootmaatsakoplossings

Verskillende materiale en hanteringsprosesse vereis verskillende sakontwerpe. Wanhefeng kan grootmaatsakke verskaf wat volgens kliënte se vereistes aangepas is, insluitend:

'n Geskikte sakontwerp kan kliënte help om operasionele gerief te verbeter en beter by hul bestaande vul-, optel- en vervoertoerusting te pas.

Betroubare industriële verpakkingsondersteuning

Wanhefeng spesialiseer in die navorsing, vervaardiging en verkoop van plastiekverpakkingsprodukte. Sy produkreeks sluit in FIBC grootmaatsakke, geleidende FIBC, voedselgraadverpakkingssakke, voeringsakke, slingersakke, geweefde sakke, PP-stof, PE-stof, hysgordels, omhulselgordels en verwante komponente.

Die maatskappy werk saam met kliënte om hul materiaal-, laai-, ontlaai-, bergings- en vervoervereistes te verstaan ​​voordat hulle 'n geskikte verpakkingkonfigurasie aanbeveel. Hierdie kliënt-gefokusde benadering ondersteun die ontwikkeling van praktiese grootmaat sak oplossings vir verskillende industriële toepassings.

Kontak Wanhefeng

Kliënte is welkom om Wanhefeng te kontak met hul vereistes vir sakgrootte, laaikapasiteit, materiaaltipe, vulmetode, afvoermetode, voering en opheffingstelsel. Wanhefeng is gereed om 'n geskikte FIBC grootmaat sak oplossing vir jou aansoek te bespreek.

Email: wanhefeng@whfpackage.com
Phone:+86 15544566565
Website: https://whfpackage.com/

Wat is die rol van concrete washout bag vir ons produksielewe? Vandag Wanhe Feng konkrete uitwas sak klein deel om jou te neem om te verstaan.

Internasionale standaard beton uitwas sak, is 'n buigsame vervoer verpakking houers. Het die voordele van vog, stof, straling weerstand, soliede sekuriteit, en in die struktuur het voldoende sterkte.

Omdat concrete washout bag laai en los, hantering is baie gerieflik, laai en los doeltreffendheid is aansienlik verbeter, in die afgelope jaar die ontwikkeling van vinnige. Kan wyd gebruik word in ingenieurswese en konstruksie van verskillende soorte poeier, korrel, klonterige goedere verpakking, is die ideale voorrade vir berging, vervoer en ander nywerhede.

Beton uitspoelsak is gemaak van polipropileen as die hoof rou materiaal, voeg 'n klein hoeveelheid stabiele byvoegsel eweredig gemeng by, smelt geëxtrudeerde plastiekfilm deur die ekstruder, in draad gesny, dan strek, deur hitte-setting om hoë-sterkte lae verlenging PP rou draad te maak, en dan deur weef, laminering gemaak van plastiek geweefde toebehore en maak weefselbasis aanmekaar concrete washout bag.

Voedselgraad fibc word dikwels gebruik in die proses van vervoer van goedere verpakking, meestal gebruik in tekstiel sy, lap en ander klere. Ons weet dit food grade fibc is meestal gemaak van plastiek materiaal grondstowwe verwerking, en in die vervoer proses dikwels teëkom lang ure van werk, sodat voedselgraad fibc warm word.Daarom, in gebruik moet bedryf word in ooreenstemming met die normale metode, ten einde gevaar te vermy.

In die proses van voedselgraad fibc, sal sommige vervaardigers spesiale materiale gebruik om te maak food grade fibc meer hoë temperatuur, maar tog, in die vervoerproses, moet jy steeds aandag gee aan die volgende situasies:

1, hang asseblief die haak in die sentrale deel van die Sling of Sling, moenie skuins hang, eensydige hang of kabel-staaf hang hoë temperatuur voedselgraad fibc.

2, die operasie laat nie die hoë temperatuur voedselgraad fibc wrywing met ander items, haak of botsing hoë temperatuur voedselgraad fibc.

3, moenie die slinger omgekeerd na buite trek nie.

4, hoë temperatuur voedselgraad fibc wanneer vurkhyser-operasies gebruik word, moet asseblief nie kontak maak met die vurk of bind aan die sakliggaam nie, om te verhoed dat hoë temperatuur voedselgraad fibc deurboor word.

5, in die werkswinkel hantering, probeer om die skinkbord te gebruik, om te verhoed dat hang haak met 'n hoë temperatuur voedselgraad fibc, kant skud kant hantering.

6, in die laai, aflaai en stapel moet hoë temperatuur voedselgraad fibc regop handhaaf.

In onlangse jare, fibc sak vervaardigers van 'n verskeidenheid van fibc bag is wyd gebruik, veral in die konstruksiebedryf meer toepassings, hoofsaaklik vir die vervoer van sement, mortel en ander materiale. Die operateur in die gebruik van fibc sak moet egter uitgevoer word in streng ooreenstemming met die spesifikasies, om die veiligheid van vervoer te verseker, die volgende fibc sak vervaardigers oor die gebruik van buigsame fibc sak spesifikasie om 'n gedetailleerde inleiding te doen, ek hoop om 'n bietjie hulp aan jou te bring.

1,in die proses van produksie.Personeel staan ​​nie onder die fibc sak nie,dit sal die meganiese werk beïnvloed, moenie skuins hangende manier gebruik nie.

2, hang asseblief die haak in die sentrale deel van die slinger of slinger. fibc bag .Haak aan of bots met die fibc-sak.

3, moenie vryf met ander items in die operasie nie.

4, moenie die slinger na buite in omgekeerde trek nie. Moenie aan die vurk raak of dit aan die sakliggaam vasmaak nie.

5, fibc sak wanneer die gebruik van vurkhyser bedrywighede.Voorkom deurboor fibc sak. Probeer om die skinkbord te gebruik.

fibc bag manufacturers

6, in die proses van hantering. Ons moet versigtig wees om te verhoed dat die gebruik van hanghaak fibc sak, kant skud kant hantering. Hou aan die fibc sak regop wanneer aflaai en stapel.

7, laai. Die personeel moet ons oorpakke dra om die goedere te laai.

8, moenie die fibc-sak regop sit nie.

9, moenie die fibc-sak op die grond of beton sleep nie.fibc-sak moet op die rak geplaas word, sodat ons kan werk.

10, moes buite gehou word.En maak seker dat jy die fibc-sak styf bedek met 'n ondeursigtige skuurlap. Draai die fibc-sak toe met papier of ondeursigtige skuurlap.

In order to ensure the safety of fibc bag in die gebruik van die proses, moet die betrokke operateurs uitgevoer word in ooreenstemming met die spesifikasie vereistes.In die proses van laai, opheffing, hantering, ens., is dit belangrik om versigtig te wees, om fibc sak deur haak of botsing te vermy, anders sal dit groot verliese veroorsaak.

Slinger sakke in die aflewering van goedere in die proses van die verskaffing van 'n meer gunstige effek, so vervaardigers in die vervaardiging en ontwerp van sulke produkte watter aspekte moet aandag gee aan dit? Trouens, in die ontwerp van die tyd volgens die gebruiksrigting is daar vier vlakke: veiligheidsfaktor, berging, toepassing.

Eerstens, die veiligheidsfaktor, die veiligheidsfaktor is die topprioriteit in die ontwerp, 'n probleem moet opgelos word, Sling bags is verantwoordelik vir 'n groot aantal goedere gebundel opheffing werk, as jy nie kan waarborg sy stabiliteit is nie gekwalifiseerde produkte, so in die ontwerp oppervlak moet aandag gee aan hierdie 'n belangrike saak.

Sling sakke

Tweedens, stoor, berging is ook die ontwerp is 'n basiese ding om aandag te skenk aan, om in ag te neem of die vorm van die materiaal kan verseker dat die normale werk in die berging proses.

Derdens word die toepassing van produkontwerp gemaak om mense te laat gebruik, as die ontwerp nie in die plek van die gebruiker is nie, sal baie min wees, minder as die effek van winsgewendheid.Maar die huidige vraag na fabrieksproduksie is groot, baie vervaardigers verkoop of koop 'n groot aantal materiale, die hoeveelheid sulke produkte is goed.

Sling sakke

After so much consideration of the production of Sling bags wat baie bevat, self netto gewig, maklik om te dra, buigsaam, maklik om toe te pas, kan geïntegreer word in multi-tipe vraghouer sak laai en aflaai werk; laai en aflaai gerieflik, verbeter die doeltreffendheid van vervoerwerk.

Ton bag is mainly loaded with bulk,granular or powdered items, the physical density of the contents and the degree of lax effect on the overall results are clearly different.

On the basis of ton bag function determination,as far as possible to use close to the customer to load the goods to do the experiment, this is the standard written in the“experimental common standard filler”, as far as possible to make technical standards to meet the market economy.

In general, after lifting the experiment ton bag is not the effect.If in the port, railway, truck lifting, the bag really fell up, just two cases:first, the operation is wrong,the second is the class ton bag failed to mention hanging experiment.

Where you can reach more than 5 times the safety factor of ton bag, four rings in two or two rings in a must have a rated load of more than twice and a half of the tension function, even if the two sling off, ton bag all will not result.

 

Jumbo -sak It is made of polyethylene or polypropylene resin as the main raw material and a small amount of auxiliary materials. After blending, the plastic film is melted and extruded by the extruder, cut into wires, and then the drawing is stopped below the melting temperature of the resin. After molecular orientation and heat setting, the flat wire with high strength and low elongation is made. After warping, weaving and laminating, the plastic woven cloth is made as the base cloth, which is sewn with sling and shroud jumbo bag 。

The appearance requirements are as follows: the warp and weft lines of the base cloth are not allowed to present two broken holes at the same place, two less sparse files are not allowed to present within 100mm2, and obvious wrong weaving is not allowed. The base cloth coating shall not present the composite quality problems such as cracking, lack of film, delamination, bubble, hard block, etc. The sewing request shall be straight, without needle dropping, thread breaking, floating thread, no brooch, over needle, return needle at the place of needle dropping shall not be less than 3-needle sling request, with the limit deviation of 40mm. The printing pattern, text and mark shall be correct and clear, and the position shall be accurate.

Performance test method: jumbo bag used as the transport package of export commodities shall stop the top lifting test, dumping test, vertical impact drop test, positive position test, tear propagation test, etc. The handle type jumbo bag only stops vertical impact drop test, dumping test and base cloth test. For example, due to the export demand, in the process of ton bag consumption, anti UV ton bag has participated in the anti aging degree and anti UV ton bag in raw PP, and also improved the tensile strength of ton bag. At present, anti UV ton bag is widely used in product packaging of various industries.

Top lifting test: keep pressure at 6 times load for 5min. Vertical impact drop test: drop freely at 0.8m height. Dumping experiment: pull down the rack at a height of 0.8m, lift one end of the movable board, and drop the sample bag in the air. Positive position experiment: lift single or double straps (if there are four straps) close to the air to separate the bag from the air. The bag body and sling shall be free from damage and the contents shall be free from leakage.

The performance of the jumbo bag is very good, so it is widely used. But not all of the jumbo bags are the same, some of them have exclusive performance. So today, we come to understand several industry-specific jumbo bags and their application characteristics.

1. The characteristics of cement jumbo bag: it has enough strength in structure. It is widely used in the cement and clinker industry for its characteristics of loading, unloading, and operating for a hundred years. And with the function of moisture-proof, waterproof and dustproof, radiation-proof!

2. Flexible jumbo bag is widely used in the transportation and packaging of powder, grain, medicine, chemical industry, mineral products etc. jumbo bag is widely used as the packaging product for transportation and storage. It is suitable for transporting bulk powder and granular materials.

3. Conductive jumbo bag: it is mainly used for the packaging of inflammable and explosive dangerous goods such as the chemical industry. It can effectively release all kinds of static electricity for a long time and eliminate the harm of static electricity. Avoid explosion accidents during loading, unloading, and transportation. The conductive silk is woven into the bag body and sling.

4. Jumbo bag, also known as ton bag of lead-zinc ore, is a kind of flexible transport packaging container. The main data are PP and PE. It is suitable for the transport of lead-zinc ore in bags for long-distance or ocean transportation.

Due to different industries, there will be some differences in the design of the jumbo bag, which is that the technology industry has expertise. If you need a jumbo bag, welcome to consult our wanhefeng Packaging Co., Ltd.

Matters needing attention in handling and transportation of slingersak

  1. Do not stand under a sling bag during forklift and crane lifting operations.
  2. Please hang the hanging hook on the center of the sling or rope of sling bag. Do not hang the sling obliquely. Hang the sling on one side or diagonally.
  3. Do not rub with other articles, hook or collide with sling bag during operation.
  4. When hoisting, do not pull the sling outward in a reverse direction.
  5. When a sling bag uses a forklift truck for operation, please do not make the fork contact or stick it into the lifting generation to prevent the lifting belt from being broken.
  6. When handling the workshop, try to use a wooden pallet, and avoid using a sling bag to move while shaking.
  7. keep sling bag upright during loading, unloading, and stacking.
  8. do not erectly slingersak.
  9. do not drag the sling bag on the ground or concrete.
  10. When it is necessary to keep it outdoors, a sling bag should be placed on the shelf and must be tightly covered with opaque tent cloth.
  11. After use, wrap sling bag with paper or opaque tent cloth and store it in a ventilated place. During hoisting, the hoisting must be balanced.
    Slingbag’s size standard is an important standard for logistics unitization. The sling bag is directly related to storage shelves, transported products, containers, transportation vehicles, unloading platforms and transportation facilities, etc. Therefore, the specifications and dimensions of the sling bag are the basis for considering the specifications and dimensions of other logistics equipment.
    For example, the sizes and widths of sling bags are 2300mm and 2700 mm. the former holds two sling bags of 1200mm×1000mm, while the latter holds three sling bags of 1200 mm× 800 mm. The flow direction of the sling bag loaded with goods directly affects the choice of sling bag size.
    Usually, the size of the sling bag (1200mm×1000mm) should be selected for goods destined for Europe. It is especially worth mentioning that in order to establish an effective sling bag utility system, a unified standard slingersak must be used. sling bag standardization is the premise for sling bag operation to be consistent.

Sling bag: sling bag is a new product, the current foreign to start using, sling bag packing operation method can be used in the sling bag, sling bag sales of manufacturers, slingersak can replace other pallets, sling bag color most of them are white-based, but also a small amount of yellow sling bag.

pallet loading and unloading operations in a forklift pallet operating efficiency can be more than 10 Labor manual handling, there are some other advantages, such as vehicle waiting time is shortened to speed up turnover, thereby improving the efficiency of vehicles and related logistics facilities, eliminating heavy manual labor, because the goods laid out neatly and easy to count, less error, but also

In the case of the gradual rise of labor costs, this advantage will now be less obvious and become more and more obvious, reduce the fatigue due to manual handling or operation errors caused by cargo damage with the improvement of environmental awareness, the use of domestic and international market container bag will become increasingly popular, market prospects will be better, which provides get healthy and sustainable development.

Jumbo sak fabriek introduces the leak-proof design of jumbo bag:

Jumbo bag of raw materials: fabric, the sling should be improved, jumbo bag suture should be particularly strong, to strengthen the use of sewing.

1, ordinary sewing on the folded seam twice on it, strengthen the use of fold sewing, sewing two times another plus twisted; the jumbo sak will not because of Sewing is not strong and spread.

2, inside the bag, can also be used in the form of oblique reinforcement to strengthen the firm jumbo bag.

3, jumbo bag sometimes to dress powder is not, such as mineral powder, powder, flour, etc., general enterprises are using the machine air filling, ordinary jumbo sak once the air filling, the powder will not with the air from the pores at the suture leakage, PE bag can not be used in this case.

Only in jumbo bag seams with leak-proof design: generally in the form of sliver suture. It can be a good solution to this problem.

People who have used Jumbo -sakke must know that there is a strap on the jumbo bag for easy lifting. Sling plays a vital role in the lifting process, so jumbo bag manufacturers in the design of the strap should be enough attention. So how to design a sling is enough science?

jumbo bag in the design to consider the volume of tons of bags, containing the weight of the load and the number of packaging units, but also consider the distance and the number of transport distances and handling times, the use of which means of transport and transport methods. For the above factors, the load-bearing capacity of the Sling should be very good, the general jumbo bag bearing is basically more than one ton, so before the use of the batch to do the testing of tensile force.

When the Sling is connected with the bag body, there are various forms of ceiling hanging, bottom hanging, side hanging, etc., and through the suture connection, so the future is also very important, only with high strength, fabric and suture can not reach a certain strength, can not ensure the overall performance of the jumbo sak.

jumbo bag wants to achieve higher performance, not only need to consider the design of the Sling but also need to improve the overall.

More about jumbosakmaatskappy latest industry developments, please pay attention to our official website more exciting content waiting for you to understand.

Oor ons

Hebei Wanhefeng Pakket Co., Ltd. is 'n professionele vervaardiger van verskeie houersak, PP-materiaal, PE-materiaal, hefgordel, omhulselgordel en sluitlyn, ens. Ons is naby Xibaipo-spoorweg, vervoer gerieflik en vinnig. Ons is 'n privaat onderneming splinternuwe, geregistreerde kapitaal RMB3 miljoen dit is 'n maatskappy wat fokus op navorsing en ontwikkeling, vervaardiging, verkoop vir plastiekverpakkingsproduk, insluitend gewone FI-houersak, Conductive- FIBC-houersak, Conductive-FI Gevaarlike sakke, Endometrium sak, Sling sak, geweefde sak, binnekant van houer sakke en so aan. Ons maatskappy beslaan 'n oppervlakte van 10 duisend vierkante meter, en meer as 300 werkers, insluitend 20 navorsers. Die FIBC kan pakhuisomset, herwinbare beskikbaarheid, hergebruikbenutting, sterk dravermoë, ligte gewig, maklik tot meganiese laai en aflaai wees, en logistiek en vervoer vergemaklik.

Vra om 'n kwotasie

Kontak Ons

  • Hebei Wanhefeng Pakket Co., Ltd.
  • +86 155 4456 6565wanhefeng@whfpackage.com
  • Hexi Industrial Zone, Weizhou Town, Jingxing County Shijiazhuang, Hebei, China 050300.
  • Hexi Industrial Zone, Weizhou Town, Jingxing County Shijiazhuang, Hebei, China 050300.+86 15544566565+86 0311-82359166

    Kopiereg © 2026 Hebei Wanhefeng Package Co.,Ltd. Alle regte voorbehou.  privacy policy

    Kontak Ons
    whatsapp

    Versoek navraag