Jumbo sak vervaardigers in die vervaardigingsproses van jumbo bag, there are a lot of processes, during which a process is the drawing process, the width of the wire and the mild tension directly determines the quality of jumbo bag, tons of bag manufacturers to take you to understand the drawing process of jumbo bag.

When drawing, when extrusion of plastic film, the need to pay attention to such a few matters.After cooling the extruded melt film, according to the different types of flat wire to select the appropriate knife distance to cut.When cutting, should try to maintain the uniformity of the flat film cutting.Flat film after cutting to be obtained by thermal stretching treatment flat wire having a greater tension.However, in order to avoid flat wire greater shrinkage in the subsequent weaving process, but also should be heat-set treatment.After passing the cutting and drawing tests of such columns, we can characterize the quality of jumbo bag tons of bags.So, jumbo bag flat wire drawing process is still very difficult not to measure oh,and this is why many of us do not want to explore it.

About jumbo bag this high-quality and high frequency of use of packaging products,a little problem is inevitable,and these problems interrupt line is a very important issue in the meantime,and how to deal with it has become our top priority Oh.Disconnection is jumbo bag manufacturers sewing often encountered problems, suture quality is not required,the machine is not adjusted properly,over the line parts have a sharp mouth,the method of operation is problematic,the needle cooling is not sufficient, etc., will lead to disconnection. jumbo bag manufacturers are not allowed to appear short-term phenomenon.Ton bag manufacturers

When using the lock stitch jumbo bag sewing machine sewing uneven thickness of the product encountered disconnection fault, in addition to one by one to consider the analysis of the above reasons,should also pay attention to the two hook thread caused by disconnection.Sewing machine occupation is well known, because of the need to plan the distribution of action cycles,lock stitch jumbo bag sewing machine shaft and rotary shuttle transmission ratio of 1: 2.That is, the upper shaft rotation for a week,the Rotary shaft to turn for two weeks.

Tagged

 

UV-resistant Jumbo Bags ,that is, UV-resistant container bags,used for chemical product storage and transportation packaging, container bags are one of the uses of chemical container bags. Is designed by the characteristics of chemical raw materials themselves packaging materials, in addition to carrying and other requirements, generally also to ensure the integrity of its packaging items, safety, as well as in line with the provisions of the corresponding national packaging materials.Tons of bags, also known as flexible container bags,tons of bags, space bags, etc., custom tons of bags tons of bags container bags, English translation of a variety, FIBC, is a kind of container unit appliances.

Tons of bag manufacturers in the production of the need to pay attention to a lot of matters, first of all to stand in the consumer’s point of view to consider, below we will introduce in detail.

The safety of tons of bags is the first thing to consider.In the design to consider the packaging volume,the weight of the load and the number of packaging units, but also consider the distance of transport and how many times of handling, what means of transport and transport methods.The practicality of tons of bags, to fully consider the specific ways and methods of customers to use tons of bags, Shandong tons of bags, such as lifting, transportation, loading material performance.Tons of bags of sealing, consumers for tons of bags of sealing performance requirements are different, so we should fully take into account.Such as powder or toxic substances, afraid of contaminated items on the sealing performance requirements are very strict, prone to moisture or mildew materials on air tightness also have special requirements.

Ton bags are mainly used in bulk,granular or powdery items, the physical density and degree of loosening of the contents of the use of different effects.

The performance of the ton bag should be as close as possible to the customer to load the product to do the test, which is the standard written in the“Test special standard filler”, as far as possible to make the technical standards to meet the challenges of the market economy.

What role can UV-resistant Jumbo Bags play?

1, container bag manufacturers packaging restrictions are very large.Powder and granular products can be packaged in container bags.

2, improve the loading and unloading power.It has a large capacity, loading and unloading is very fast, more than ten times more efficient than conventional paper bag packaging line.

3, can effectively maintain the product.Container bag data is rain-proof, impermeable function, after filling in the Outdoor can also be moisture-proof.

4, take up less space.Empty bags can be folded,small size, round tons of bags tons of bags, full bag capacity.

5, long life, UV-resistant Jumbo Bags tons of bags,can be used repeatedly.Ton bags are made from high-strength data, durable, and can be accepted and reused.

Tagged

The quality of fibc bags generally depends on people, equipment, raw materials, as well as operating methods and production environment. The following tons of bags, tons of bags, FIBC bags xiaobian to give you an interpretation.
First, personnel problems: personnel problems mainly reflect the staff’s sense of responsibility and technical proficiency.
Second, equipment problems: the production of fibc bags equipment aging, drying and bag feeding technology is poor, etc. will lead to fibc bags production process adhesion and other problems.
Third, the raw material problems: raw material problems, including the quality of the ink, the degree of uniformity of mixing, the quality of the bag sheet, or offset problems, etc., will lead to printing problems.
The above problems are fibc bags production problems often exist,in order to ensure the excellent quality of fibc bags, to fundamentally improve the production of fibc bags.

Tagged

 

Export food grade fibc is the company for the majority of consumers to provide professional,in addition,for what is the ton of tons of bags,there are also a lot of aspects, the following with xiaobian together to understand what is the ton of food grade fibc

Tonnage refers to the purity of 1 ton of material.

voedselgraad fibc

When calculating a grade price can be used,is usually said how much money a grade (or tons).For example, metal tons is 100 yuan/ton,then each grade (tons)price is 100/100 = 1 yuan.The metal content of physical tons is 50%(50 grade),then the price of physical tons is: 1 * 50 = 50 yuan/ton.

Generally build three concepts：

Physical tons:metal-containing grade is high and low,as well as the difference between wet and dry basis, generally based on dry basis.

Base tons:the base tons are used at the time of conclusion of the contract, and the physical tons are converted into base tons at the time of delivery.

Metal tons:generally not useful in the delivery,just in the conversation we know how much a ton of metal.In fact, the benchmark ton price represents the price of metal tons.

Tagged

As a buyer, before buying a bulk bags, ordinary to know a few effects: have you used this product before.Assuming useful, then the packaging can be suitable for my product.
Assuming it is appropriate, then it is very complex,you just need to understand the size of my previously used tons of bags, for example, length, width, height are more, perhaps round bulk bags, diameter and height is how much.There is no film, is a single layer or a double layer, bulk bags can have a discharge port, the center of the inlet is a large opening or a small mouth, Sling is two or four hanging hanging, hanging or pocket bottom.

These have to figure out, assuming that there is a printed bag, printed content do not make a mistake, or printed up and then change there is no way.Another important point, assuming that you can not provide samples to manufacturers quotes and consumption, it is possible to inform consumer manufacturers, bulk bags bag weight is how much, so that manufacturers can be based on the weight of the bag you provide, to calculate how thick fabric to help you consume.

Assume that you can provide photos to manufacturers, it will be more intuitive, experienced consumer manufacturers, see the picture, you can know about bulk bags material and bag weight.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

Tagged

Of course, the printing quality of the container tons of bags depends on the following elements, personnel issues: personnel issues mainly reflect the employee’s sense of obligation and technical proficiency level. Equipment technology: container tons of bag equipment consumption aging, drying, and bag feeding technology will lead to the container bag consumption process presents a variety of adhesions and other issues. The raw material is good or bad: including ink quality, mixing average, bag quality, or offset printing problems, and other raw material problems will lead to printing problems.

Jumbo bag manufacturers in the consumption of jumbo bag are very careful, they will use the data processing, which will use the spinning process consumption FIBC, but spinning process compared to the trouble, always present in the consumption or more or fewer problems, but the phenomenon of bamboo during surgery, what is the reason? The cooling water temperature is high. The crystallinity of the polypropylene film is too large.

Stretching temperature is low. Oven temperature is low, or uneven temperature spread, which leads to spinning is stretched at inappropriate temperatures. The extrusion temperature is low. The extrusion temperature is low, the film is not plasticized. The stretch ratio is low. The stretch ratio is low, the blank is not stretched enough. Bag manufacturers in the packaging process of consumption in the process of consumption of bamboo yarn have a great impact on the quality of the bag, so the net bag manufacturers will spend a lot of human and material resources. About this.

jumbo bag is a new type of packaging container. Admittedly not presented for a long time, but it carried out quickly. The use of container bags can speed up loading and unloading efficiency. Its large capacity, loading, and unloading speed. Paper bag packaging a lot; transport is also very bento, the jumbo bag has a special ring, bento lifting equipment used. the jumbo bag takes up very good space. After folding can store empty bags, but after the expansion of the empty bag capacity; container bags use long life, can be used repeatedly.

 

Operator:Abner.Li

Tagged

Different packaging materials, different requirements.

Such as powder or articles, afraid of contaminated items on the sealing performance requirements are very strict, easy to damp or mildew materials for airtightness also have special requirements. So in the design of ton bag, pay attention to consider the fabric coating process and the effect of the sewing process on the dust.

Tons of bags to facilitate the shipment of bulk powder materials, with a large volume, lightweight and other characteristics, the following jumbo bag factory to introduce the ton bag dust removal process knowledge：

Removal of export tons of bags with cloth surface dust methods are:

1, tons of cloth before importing Composite roll from the delivery frame, or plus Corona impact cloth, decontamination and to oil; or the installation of a wide brush, sweep away dust cloth; or the use of rubber-coated special cleaning roller.

2, Cleaning roller close to the cloth surface, the cloth surface can be transferred to the precipitated powder at both ends of the cloth edge rotation. Thereby reducing the dust due to excessive cloth flour, resulting in the impact of the coating peel strength.

In fact, in practice, the diaphragm gap distance and offset between the two must be combined with other process parameters and flexible applications.

Because for different jumbo bag substrate, the degree of heat absorption, and the ability to resist burns are different.

We can be based on different substrates coated, adjusted from different air gap distance and Offset in different diaphragms, looking for good results.

Tagged

People who have used Jumbo -sakke must know that there is a strap on the jumbo bag for easy lifting. Sling plays a vital role in the lifting process, so jumbo bag manufacturers in the design of the strap should be enough attention. So how to design a sling is enough science?

jumbo bag in the design to consider the volume of tons of bags, containing the weight of the load and the number of packaging units, but also consider the distance and the number of transport distances and handling times, the use of which means of transport and transport methods. For the above factors, the load-bearing capacity of the Sling should be very good, the general jumbo bag bearing is basically more than one ton, so before the use of the batch to do the testing of tensile force.

When the Sling is connected with the bag body, there are various forms of ceiling hanging, bottom hanging, side hanging, etc., and through the suture connection, so the future is also very important, only with high strength, fabric and suture can not reach a certain strength, can not ensure the overall performance of the jumbo sak.

jumbo bag wants to achieve higher performance, not only need to consider the design of the Sling but also need to improve the overall.

More about jumbosakmaatskappy latest industry developments, please pay attention to our official website more exciting content waiting for you to understand.

Tagged

Traditional baffelsakke stretch to plastic film-based. The role of reinforcement in the bag is filled with bags of materials to keep the bag cubic shape of tons, to prevent the bag-shaped expansion was drum-shaped, saving space stacking and transport.

However, the traditional baffle bags in the stretch, due to the design is not reasonable, can not guarantee the smooth flow of materials, resulting in some areas of the bag material is not easy to reach, resulting in the inadequate filling. So it is necessary to improve the existing baffle bags, reasonable design of its reinforcement structure.

meshes baffelsakke, its reinforcement using a grid-like structure, compared with the traditional sheet-like reinforcement to improve the liquidity of the material filling, improve the efficiency of filling, while increasing the effective volume of the bag. Its mesh stretch with two pieces, the middle of a flexible connection structure, making it easier to make tons of bags, and easy to fold and store reduces the weight and volume of the bag.

Tagged

FIBC sakke are different from ordinary woven bags because his bearing capacity than ordinary packaging is much larger, so his various parts of the suture are critical requirements, rather than ordinary plastic bags as simple heat on the line, is the need to go through multiple processes and other components are combined.
This goal is the FIBC saks the most important, the most important goal. The main factors affecting the strength of the suture are the variety and type of suture, stitch size, stitch, stitch, stitch or fold the suture to the edge of the bag scale, eager and cold cutting methods.
In general, FIBC bags production companies should develop internal control objectives for these influencing factors. About FIBC bags, national norms in the rules, the tensile strength of the main part of the convergence is necessary to reach more than 67% of the fundamental strength, the tensile strength of the bottom part of the convergence is necessary to reach more than 42% of the fundamental strength. On the cement bag on the sealing socket, advocate as the seam to the strength of the disposal, on the paper bag seam to the strength of the bottom, usually is not up to the goal, it is advocated to paste the bottom of the bag. About laminating cold cut bag, advocated the use of curling treatment, because of the cold cut marginal suture may tear out from the warp and weft. On the strength of the demand for non-woven bag catchy edge Week, Needle distance can be dense, the line can be fine.
More knowledge about FIBC sakke can consult us, FIBC bags manufacturers welcome to order with FIBC bags, tons of bags demand.

Tagged

FIBC sakke appearance detection method is one of the important ways to determine the quality, but many users in tons of bags manufacturers to buy the time and do not know how to view, here with us together to learn more about it!

First of all, pay attention to observe the situation tons of bags of silk, the appearance of color shades of difference can not be significant, not light and dark, can not be approved before the light, after the batch of Dark, change frequently; and pay attention not mixed with two or more colors of yarn. Then, the color of the layout of the positive, color to maintain a common, do not fade, tons of bags of color between batches must seek common, if not common, then indicate the presence of tons of bags of product quality must be a problem.

There is a demand we pay special attention to is that the FIBC sakke layout printing should also be clear, no overlapping shadow, printing appearance can not be dirty, the picture should be clear and distinct. Pay attention to the appearance of do not have the condition of broken or snag, have this situation must be replaced. In the hours to be able to pay attention to these issues.

Tagged

Oor ons

Hebei Wanhefeng Package Co.,Ltd. is a professsional manufacturer of various of container bag, PP fabric, PE fabric, lifting belt, shroud belt and locking line etc. We are near Xibaipo Railway, transportation convenient and quick.We are a private enterprise brand new, registered capital RMB3 million it is a company that focuses on research and development, produce, sale for plastic packing product, including common container bag, Conductive FIBC, Drug FIBC, Food-grade container bag, Drangerous bags, Endometrium bag, Sling bag, Woven bag, inner of container bags and so on. Our company covers an area of 10 thousand square meters, and more than 300 workers, including 20 researchers. The FIBC could be warehouse turnover, recoverable availability, reuse utilization, strong bearing capacity, light weight, easy to mechanical loading and unloading,and facilitate logistics and transportation.

PRODUCTS

Vra om 'n kwotasie

Kontak Ons

  • Hebei Wanhefeng Package Co.,Ltd.
    • +86 13473432566wanhefeng@whfpackage.com
  • Hexi Industrial Park, Weizhou Town, Jingxing County, Shijiazhuang, Hebei, China.
    • Hexi Industrial Zone , Weizhou Town ,Jingxing County Shijiazhuang,Hebei ,China 050300.+86 15544566565+86 0311-82359166
    wanhefeng@whfpackage.comnancy@whfpackage.com

    Copyright © 2026 Hebei Wanhefeng Package Co.,Ltd. All Rights Reserved.  privacy policy

    Kontak Ons
    whatsapp

    Request Inquery