Everyone has seen FIBC Bags. Isn’t many people starting to react with a bag of things? There is no technical requirement. In fact, there is a lot of attention to the selection of FIBC Bags. It is thick or thin. According to the weight, FIBC Bags should be made according to weight. This is based on a professional production.

First, the weight of the loaded goods should be clarified, and the FIBC Bags volume should be measured according to the specific gravity of the packaged materials. It depends on whether the loaded material is a sharp and hard block material. If it is, the fabric of the FIBC Bags should be thicker when it is designed, but it can be thinner. In the actual design, the FIBC Bags with a load of 500kg, the base fabric is generally selected from (150-170) G/m2, the longitudinal and transverse tensile strength (1470-1700) N/5cm of the base fabric, and the elongation is 20-35%. FIBC Bags with a load of more than 1000kg. The base fabric is generally selected from (170~210) G/m2, the longitudinal and transverse tensile strength of the base fabric is (1700-2000) N/5cm, and the elongation is 20~35%.

Small items are very particular, FIBC Bags production methods are similar, but the technical requirements and product quality are sometimes far from each other.